| Customization: | Available |
|---|---|
| Warranty: | 5 Years |
| Heating Mode: | Steam or Electronic Spray Drying |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Simple Introduction:
Spray drying is the widest used technology in the liquid shaping technology and in the drying industry. Centrifugal Atomizing (Spray) Drying Equipment is most suitable for producing powder, particles or solid block products from materials of solution, emulsion, soliquoid and pumpable paste states. Therefore, spray drying is useful to create the desired particle size, residual water contents, the stocking density, and the particle shape needed to meet precise standards
2. Working principle:
The air is through the filter and heater, the air distributor which enters the dedicator top, the hot air takes the form of spiral and enters the dedicator evenly. The material liquid , from the material liquid trough from the at odds with the community or the leadership atomizer for the dedicator top of pump sending through the filter, make the material liquid gush out into an extremely small calorific drop, material liquid and hot air flow and keep in touch, moisture evaporate rapidly, within extremely short time dry to become finished product, finished product discharge by dry tower bottom and whirlwind separator, the waste gas is discharged by the air blower.
Main technical Data
| Item | Specification |
| Water Evaporation | 5kg/h |
| Method of Atomizing | High Speed Centrifugal Atomizer (mechanical drive or stepless frequency speed regulation is available) |
| Revolution of atomizer(rpm) | 15500 |
| Diameter of Atomizing disc (mm) | 60 |
| Dried Powder Recovery Rate (%) | Around≥95 |
| Length of Covered Area(m) | 1.6 |
| Width of Covered Area(m) | 1.1 |
| Height of Tower Body(m) | 2.2 |
| Hoisting height of Nozzle(m) | 1.8 |
| Air input Temp | 160~200ºC |
| Air output Temp | 70~90ºC |
| Tower Height | 1750mm |
| Induce Fan Power | 3 kw |
| Air Blower Fan Power | 2 kw |
| Feeding pump power | 1 kw |
| Nebulizer Power | 2 kw |
| Vibrator air volume | 1CBM/min |
| E-Heating Power | 12 kw |
Final Product
){kind=link}